Since 1993 the HV1000 whole house fan has
been cooling homes across America. The HV is energy efficient,
quiet (3 sones), draft proof, completely automatic and UL/CUL listed.
The HV series requires no maintenance. The
fan motors of the HV1000 are of extremely high quality and are built to
last. The unit is available as a standard with R-22 insulated
doors. There is an option for R-38 insulation. The HV series
of fans are insulated and when not in use form an air tight seal between
your attic and living space. There is no other unit
available that boasts these levels of insulation and protection.
As an additional quality control method, every single unit is tested and
run at the factory for 24 hours prior to shipping, a commitment to a
great product which we can say is Made In The USA.
House Size:
HV1000™
Typical
24" Fan
Typical
30" Fan
Air Flow:
1000 cfm
3000 cfm
6000 cfm
1500 Square Ft.:
12 minutes
4
minutes
2
minutes
2000 Square Ft.:
16 minutes
5.33
minutes
2.67
minutes
2500 Square Ft.:
20 minutes
6.67
minutes
3.33
minutes
The HV1000 is available in the following models:
HV1000: 1000 cfm unit, wall switch control, R-22 Insulation
HV1000-DB: 1000 cfm unit, wall switch control, R-38 Insulation
HV1000-R: 1000
cfm, remote control operation, R-22 Insulation
HV1000-DR: 1000 cfm, remote control operation, R-38 Insulation
Click Photo To Enlarge - HV1000 Closed
Click To Enlarge Photo - HV1000 Opened
Click Photo To Enlarge - HV1000DB
Closed - R38 Insulation
Click Photo To Enlarge - HV1000DB
Opened - R38 Insulation
Grille: The HV system includes a 24"
x 14" white return air grille. The outside diameter of the grille
measures 25 3/4" x 15 3/4". The rough opening of the grille
measures 23 1/4" x 13 7/8".
Controls:
The unit will either be equipped (depending upon model number as listed
above) with either a wall switch, or remote control.
Wireless
Remote Control (RC) for the HV1000: The wireless remote
control is a very popular item as there is no need to run electrical
line down a wall for the switch. Available on Models HV1000-R,
HV1000-DR. Additionally, customers who in the past have purchased
standard HV1000 models can upgrade to the remote control option.
The dedicated
remote control system offers the user a simplified 110 volt powered
remote control. The system includes a
hand-held transmitter, which operates on a 12-volt battery (included),
a receiver which has been built into the fan. The transmitter features a signal operating light that goes on
when the ON or OFF buttons are depressed. The controls offer 256 unique
security codes that are factory programmed into the system allowing
multiple remote control units in the same room or building. The systems
operating distance is 60' and is not
restricted to "line-of-sight" applications because the system uses radio
frequency control. It operates on the R.F.
frequency of 303.875 MHz. The control is UL listed and is FCC certified
in the U.S. and I.S.C. certified in Canada.
Net Free Area Defined: For every 750 cfm of airflow, it is
recommended that there be a minimum of 1 sq. ft. of attic venting, i.e.
roof vents, gable vents, soffit vents, ridge vent. This will allow
the air flow of the fan's exhaust air into the attic the ability to flow
out of the home freely.
To calculate your net free area: - Count and add up your total number of
vents in feet. If your vent(s) are screened take approx. 1/2 away
from your total. For example:
You have four 1 sq. ft vents, and they are screened. You
would have a 4 sq ft gross of venting, however since the screens will
block air flow, you would need to subtract approximately 2 sq. ft of
venting from your gross, giving you a 2 sq. ft net free area.
Warranty: The unit comes standard with a 3 year limited warranty.
