Two speed operation with an amazing 2800 cubic feet per minute on high air flow rating and a quiet 1650 cubic feet per minute on low.  Uses a handheld RF remote control (included) and a simple line cord to plug into any attic outlet (115 VAC).   The Ghost will fit 16" or 24" on center rafters.  The Ghost has been designed in a 2 piece modular fashion, so it can now fit in almost any attic!

The Ghost whole house fan combines the ease of installation and the efficiency of operation of motorized insulated doors with an energy efficient, large diameter fan to produce a remarkably quiet whole house fan that closes and seals when it is not being used.  When it is cooler outside than it is inside, a whole house cooler can flush the hot attic air out of your house through your attic, lowering the attic temperatures at the same time.

Product Description:

The Ghost is a whole house fan that mounts easily on top of the rafters in the attic and effectively draws 2800 cubic feet of air per minute through the house.   The Ghost's unique design includes a small lower housing that fits between 16" or 24" on center rafters.  Internal motorized and insulated doors open into the fan chamber when the unit is turned on, then the 20" diameter fan blade begins drawing the air out of the living space and into your attic.

• Small "footprint" - fits between 16" or 24" on center rafters

• Well Insulated, positive, automatic seal

• Two speed radio frequency remote control

• Simple white 14.5" x 22.5" return grill on ceiling

• Energy efficient - 6.2 cfm/watt

• Remarkably Quiet.

• 3 Year limited warranty

 

House Size:	HV1600™	The Ghost	Typical 30" Fan
Air Flow:	1000 cfm/low	1600 cfm low	6000 cfm
	1600 cfm/high	2800 cfm high
1500 Square Ft.:	7.5 minutes/high	4.28  minutes/high	2 minutes
2000 Square Ft.:	10 minutes/high	5.71 minutes/high	2.67 minutes
2500 Square Ft.:	12.5 minutes/high	7.14 minutes/high	3.33 minutes

Location:  The Ghost should be installed centrally, on the floor of an attic, allowing as much room as possible above the fan.  Installed on the top of the rafters, the Ghost is 28" high.  For proper air flow out of the attic, there should be at least 4 square feet of combined free opening from the attic to the outside.  Restricting the air flow outside will cause the system to work less efficiently and may over-pressurize the attic and force stale, attic air back down into the home.

For best operation, it is recommended to allow two feet of clearance above fan. 

Control:  The Ghost comes with a two speed, Radio Frequency remote control.  We have tested the units range to over 60'. 

Specifications:
Power:	115 VAC 60Hz Line Cord Plug
High Speed	450 Watts - 4 amps
Low Speed	340 Watts - 3 amps
Sound Level Below Fan:
High Speed	68 DBa
Low Speed	59 DBa
R value through doors:	R22 Standard R38 Available
Color	Green
Air Flow:
High Speed	2800 cfm @ .1" WC
Low Speed	1600 cfm @ .1 WC
Housing Dimensions:	Overall height = 27” Upper Housing L x W x H = 26 ¼” x 26” x 14 1/8”  Lower Housing = 25 7/8” x 29 ½” x 13 5/8” minimum attic opening:  26 ½” x 14 ½”.
Weight:	65 pounds

Installation:  

1.  Make sure the fan will fit into your attic area, the dimensions are 26 1/2" Length x 14 1/2" Wide

2.  Find central location in attic, allowing as much room as possible above the fan, it is recommended a minimum of 2 feet.  The Ghost will sit approximately 30" high from the top of your attic rafters.

3. The Ghost has the same simple framing requirements as the HV1000/HV1600 - as found here.  (Rough opening 14 1/2" x 22 1/2")

4.  The Ghost's comes with a 6' standard line cord that will plug into a standard three prong 115 VAC electrical outlet.  No hard wiring of the unit is required.  If you do not have an electrical outlet in the attic, we would recommend having a licensed electrician install one for you.  Plug the ghost into the outlet and it is ready to go.

5. Install the return air grille from your living area onto your ceiling.  It will look similar to this photo.

On low at 1600 cfm it is so quiet you will hardly know that it is running.  On high at 2800 cfm, it emits a comfortable, low frequency murmur indicative of its very efficient but powerful motor. 

Order The Ghost Below:

The Ghost Whole House Fan ~ R22 or R38 Insulation

~ The Tamarack Ghost ~ R22 Note: A min.  opening of 26 1/2" inches by 14 1/2" inches required with 3' of clearance above the opening.	On Sale Now at $1,249.00 plus shipping
	Quantity:

 

~ Tamarack Ghost - R38 ~	Buy Now @ $1,449.00 plus shipping
Tamarack Ghost R-38 Insulation - Limited Quantities - In Stock.  Unit Are Available For Immediate Sale.	Quantity: